GRAS 12AD 1-Channel Power Module
Connection:
Traditional 200 V
Channel(s): 1
Technology
Typical applications and use
-
General-purpose measurements
-
Precision measurements
-
Acoustic monitoring
-
Microphone calibration
-
0 V or 200 V polarization
Design
The 12AD can be powered either by internal standard batteries or an external DC supply (4.5 V- 24 V), e.g. a mains/line adapter. It is built into a sturdy anodized aluminium cabinet.
The polarization voltage for the microphone fitted to the preamplifier can be set to 0 V — for prepolarized microphones, or 200 V — for externally polarized microphones.
The 12AD also supplies ± 15 V to power the preamplifier. It will run for approximately 50 hours on fresh standard alkaline batteries. A Low Batt LED indicates the condition of the batteries.
The input is a 7-pin LEMO socket on the front panel, which is wired up for GRASmicrophone preamplifiers, e.g. 26AB, 26AC,26AJ and 26AK, but is also compatible with other available makes of similar microphone preamplifiers.
The signal from the preamplifier is AC coupled to the output which is a standard BNC socket also on the front panel.
Warranty
All GRAS products are made of high-quality materials that will ensure life-long stability and robustness. The 12AD is delivered with a 2-year warranty. The warranty does not cover products that are damaged due to negligent use.
Service and Repairs
All repairs are made at GRAS International Support Center located in Denmark. Our Support Center is equipped with the newest test equipment and staffed with dedicated and highly skilled engineers. Upon request, we make cost estimates based on fixed repair categories. If a product covered by warranty is sent for service, it is repaired free of charge, unless the damage is the result of negligent use or other violations of the warranty.
Warranty
All GRAS products are made of high-quality materials that will ensure life-long stability and robustness. The 12AG is delivered with a 2-year warranty. The warranty does not cover products that are damaged due to negligent use.
Service and Repairs
All repairs are made at GRAS International Support Center located in Denmark. Our Support Center is equipped with the newest test equipment and staffed with dedicated and highly skilled engineers. Upon request, we make cost estimates based on fixed repair categories. If a product covered by warranty is sent for service, it is repaired free of charge, unless the damage is the result of negligent use or other violations of the warranty.
Specifications
Ordering info
Accessories
|
GRAS AB0002 |
Mains/line adapter |
Extension cables with 7-pin LEMO connectors
| GRAS AA0008 | 3 m |
| GRAS AA0009 | 10 m |
|
GRAS AA0012 |
30 m |
|
GRAS AA0014 |
100 m |
|
GRAS AA0020-XX |
Custom, XX specifies the length in metres |
Extension cables with BNC connectors
|
GRAS AA0034 |
2 m |
| 3 m | |
|
GRAS AA0036 |
5 m |
| 10 m | |
|
GRAS AA0038 |
30 m |
|
GRAS AA0039-XX |
Custom, XX specifies the length in metres |
GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.
