GRAS 26CC 1/4" CCP Standard Preamplifier with SMB Connector
Freq range: 2.5 Hz - 200 kHz
Noise: 1.8 µV Gain: -0.35 dB
Special feature: General purpose
The GRAS 26CC 1/4" Preamplifier is a general purpose preamplifier optimized for use with prepolarized condenser microphones. It is a small, robust unit and uses a GRAS CCP power supply, e.g. GRAS 12AL. It has a very low inherent noise level, a large dynamic range and a frequency response from below 2 Hz to above 200 kHz.
Technology
Typical applications and use
- CCP inputs
- Plugs into Array Module PR0001(-1)
- Prepolarized microphones
- 1/4" precision microphones
- High levels and high frequencies
Design
The GRAS 26CC 1/4" Preamplifier's small ceramic thick-film substrate has a very high input impedance, and is shielded by a guard ring to minimise the influence of stray capacitance and microphonic interference.
The 26CC is delivered with a built-in TEDS chip, and can be programmed as a single unit with a microphone fitted. It can be used with GRAS 40BE and 40BD ¼-inch prepolarized microphones and 40AE, 40AD and 40AQ ½-inch microphones using the included GRAS GR0010 Adapter for 1/4" preamplifier and 1/2" microphone.
SMB-to-BNC cables in standard and customized lengths are available. The casing is made of stainless steel for maximumstrength and durability.
Specifications
Conditions: 23 °C Ambient temperature, 4 mA / 24 V open loop CCP voltage, 18 pF dummy microphone & 3 m coax-cable.
Typical low-frequency response of Type 26AL for ½″ (20 pF), ¼″ (6.5 pF) and ⅛″ (3 pF) microphones
Typical max. rms output signal with 120 V and 30 V supply GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.
Dimensions
Ordering info
Included items
| GRAS GR0010 |
Adapter for 1/4" preamplifier and 1/2" microphone |
Optional items
|
3 m SMB - BNC Cable |
|
| GRAS AL0029 |
1/4" Microphone Holder, POM |
|
1/4" Microphone Holder, Stainless Steel |
|
|
Swivel head |
|
| GRAS AL0006 |
Tripod |
|
Adapter for 1/8" microphone and 1/4" preamplifier |
|
|
Right-angled (90º) Adapter for 1/4" Microphone and 1/4" Preamplifier |
|
|
6pF Preamplifier-input adapter for 1/4" microphones |
|
|
1-Channel CCP Power Module with A-weighting filter |
|
|
2-Channel Universal Power Module with signal conditioning and PC interface |
GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.
