GRAS 50VI-1 Vector intensity probe

Freq range: IEC 61043 Class 1
Dyn range: 25 dB(A) to 152 dB
Sensitivity: 25 mV/Pa

GRAS 50VI-1 Vector intensity probe


Typical applications and use

  • Vector-intensity measurements
  • Soundfield mapping
  • Sound-source location
  • Near-field investigations


The 50VI-1 full 3-dimensional vector intensity probe complies fully with the requirements in IEC 61043, Electroacoustics - Instruments for the Measurement of Sound Intensity - Measurements with Pairs of Pressure Sensing Microphones, 1993 for Class 1 Sound-intensityprobes, and ISO/DIS 11205.2, Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity.

The first generation of sound intensity probes was designed and developed using available standard microphones and preamplfiers, resulting in a number of compromises regarding size, acoustical performance and durability. In the new generation of sound-intensity probes, all components have been made specifically for sound intensity applications. Each small 1/4-inch diameter and 40mm long microphone preamplfier is housed in a robust, stainless steel casing which enables novel probe designs. These novel probe designs reduce the disturbances to the sound field otherwise brought about by the effects of shadows and diffraction, and its symmetry enables reliable calibrations as described in the standard (ISO/DIS 9614-2) for sound power measurements using sound-intensity measurements.

The Vector Intensity Probe Type 50VI includes three pairs of GRAS 40AI Sound-intensity microphones, three pairs of GRAS 26AA 1/4-inch Preamplifiers, 25 mm and 50 mm spacers covering the frequency range from 80 Hz to 6.3 kHz. The probe handle has an input for 6 preamplifiers and LEDs for indicating two states as well as a push button for remote control. The remote-controlled output can, for example, be connected to the RS232 port of a computer for controlling the process of data acquisition.

The output of the probe handle is a 24-pin LEMO connector and the 50VI includes a 5 m cable terminating in another 24-pin LEMO connector. This can be connected to a break-out adapter with six standard 7-pin LEMO microphone connectors for connection to the GRAS 12AC 6-Channel Power Module for GRAS Vector-intensity Probe.


0 V / CCP
Frequency range (±2 dB)
IEC 61043
Dynamic range lower limit (microphone thermal noise)
Dynamic range upper limit
Set sensitivity @ 250 Hz (±2 dB)
Polarization voltage
Microphone venting
IEC 61094-4 Compliance
Temperature range, operation
°C / °F
5 to 40 / 41 to 104
Temperature coefficient @250 Hz
dB/°C / dB/°F
Humidity range non condensing
% RH
0 - 100
Humidity coefficient @250 Hz
dB/% RH
Influence of axial vibration @1 m/s²
dB re 20 µPa
Connector type
24-pin LEMO
CE/RoHS compliant/WEEE registered
g / oz
450 / 15.873

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Ordering info

Included items


Small light weight microphone tripod


10 m cable


Y-cable adapter

Optional accessories

GRAS 12AC 6-Channel Power Module for GRAS Vector-intensity Probe
GRAS AM0365 Windscreen for GRAS Vector-Intensity Probe

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Get Quote

I have read and accept the Privacy Policy.
Please fill google captcha