Accessories

Recommendation: Choose a microphone with low sensitivity instead of using the RA0016.The RA0016 is a 20 dB attenuator for inserting between a 1/2" microphone and preamplifier. It will attenuate the output signal of the microphone by 20 dB in order to avoid overloading the preamplifier. The RA0016 is useful when measuring very high sound pressure levels using a preamplifier with limited dynamic range.  The RA0016 will work properly only with externally polarized microphones. For prepolarized microphones, use the RA0018.

The RA0022 is specially designed and optimized for use with 1/4" microphones for sound pressure measurements, when high speed wind comes from one known direction e.g. in a wind tunnel.

The GRAS 67TS Turbulence Screen Kit is designed for aeroacoustic testing in solid-walled wind tunnels. The hydrodynamic component of turbulence is attenuated up to 25 dB. Thereby the acoustic signals of interest can be identified and diagnosed with a reliable resolution.

Microphone clips 12 mm and 25 mm for side-by-side mounting of a pair of 1/4” intensity microphones.

The GRAS AL0013 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 1/4" diameter preamplifier.

AM0069 contains 5 spherical windscreens for 1/2" microphones optimized for sound pressure measurements under free-field conditions.

AM0071 contains 5 spherical windscreens for 1/4" microphones optimized for sound pressure measurements under free-field conditions.

AM0363 contains 5 spherical windscreens for 1" microphones optimized for sound pressure measurements under free-field conditions.

AM0364 contains 6 spherical windscreens optimized for 1/4" dedicated array microphones, or other 1/4" microphone sets mounted in array modules PR0001 & PR0002.

The AM0376 is an elliptical windscreen for use with GRAS Sound Intensity Probe 50GI.

The RA0001 is a right-angled adapter for using a 1/2" microphone with a 1/4" preamplifier. It can be used with any standard 1/2" microphone and 1/4" preamplifier such as the GRAS 26AC. The RA0001 could be useful in situations where the microphone has to be flush mounted on a wall.

The GRAS RA0003 is a straight adapter, for placing between a 1/2" microphone and a 1/4" preamplifier.

The RA0006 is a right-angled adapter for using a 1/4" microphone with a 1/4" preamplifier. It can be used with any standard 1/4" microphone and 1/4" preamplifier such as the GRAS 26AC. The RA0006 could be useful in situations where the microphone has to be flush mounted on a wall.

The RA0017 is a simple adapter for using a 1" microphone with a 1/2" preamplifier. It can be used with any standard 1" microphone and 1/2" preamplifier such as the GRAS 26AK.

Recommendation: Choose a microphone with low sensitivity instead of using the RA0018.RA0018 is a 20 dB attenuator for inserting between a 1/2" prepolarized microphone and preamplifier. It will attenuate the output signal of the microphone by 20 dB in order to avoid overloading of the preamplifier. The RA0018 is useful when measuring very high sound pressure levels using a preamplifier with limited dynamic range.The RA0018 will work properly only with prepolarized microphones. For externally-polarized microphones, use the RA0016.

The RA0019 is an adapter for using a 1/4" microphone with a 1/2" preamplifier. Its influence on the acoustic field is minimal. To reduce attenuation of the microphone signal, the guard ring of the preamplifier is extended through the RA0019.

The RA0020 is specially designed and optimized for use with 1/2" microphones for sound pressure measurements, when high speed wind comes from one known direction e.g. in a wind tunnel.

RA0020-A is a nosecone for 1/2" microphones. It is similar to RA0020 but made of aluminium for lightness.

The RA0026 is specially designed and optimized for use with 1/4" microphones for sound pressure measurements, when high speed wind comes from one known direction e.g. in a wind tunnel.

The RA0063 is an adapter for using a 1/8" microphone with a 1/4" preamplifier. It can be used with any standard 1/8" microphone and 1/4" preamplifier such as the GRAS 26AC.

The GRAS RA0067 enables a prepolarized 1/2" microphone (typically a GRAS 40AD) to be used as a high-impedance sound source.

The RA0073 is an adapter for using a 1˝ microphone with a ½˝ preamplifier.The influence of the RA0073 on the acoustic field is minimal.

The GRAS RA0077 adapts a 1/2” microphone (remove grid) into a 1" microphone (without grid). Designed for NBS 9A / IEC 60313 Coupler GRAS RA0075 and Artificial Ear with NBS Coupler GRAS 43AF.

Pliers for firm but gentle gripping of a 1/2” microphone when unscrewing its protection grid or unscrewing the microphone from a preamplifier.

The GRAS RA0082 is an adapter for using a 1/8" microphone with a 1/4" preamplifier.

The GRAS RA0086 is similar to the GRAS RA0067 but is used with a 1/4" externally polarised microphone (typically a GRAS 40BP) which can then be used as a high-impedance sound source, e.g. when calibrating an acoustic coupler such as the GRAS RA0045. The RA0086 has a microdot connector.

For avoiding ground loops, e.g. with GRAS RA0085 Insulated coupling for artificial ear in telephone testing set-ups using the GRAS 43AD Artificial Ear.

Cap for rain protection of GRAS array microphones GRAS 40PR and 40PQ. It also fits QC microphones 40PP and 40PK.

  For use when humidity levels are high and only with a rear-vented 1” microphone. An indicator placed on the side of the dehumidifier shows when it needs to be dried out before further use. In the case of the GRAS 40EH 1” Microphone used in the GRAS 40HF Low-noise Level Microphone System, please order only at the time of ordering a GRAS 40HF.  

For use with GRAS RA0113 2cc Coupler.

The RA0117 is an adapter for mounting a 1/4" microphone in couplers designed for 1/2" microphones.

Recommendation: Choose a microphone with low sensitivity instead of using the RA0118. The RA0118 is an attenuator for inserting between a 1/4" microphone and preamplifier. It attenuates the output signal of the microphone by approximately 16 dB in order to avoid overloading the preamplifier or following analyzer. The RA0118 is useful when measuring very high sound pressure levels using a preamplifier or analyzer with limited dynamic range.

For use with 1/2” Free-field microphones when measuring noise according to ANSI requirements.

The RA0127 is a rain protection cap for use with 1/4" microphones.

The GRAS RA0131 is a rain protection cap for use with 1/2" microphones.

For use when humidity levels are high and only with a rear-vented 1/2” microphone.An indicator placed on the side of the dehumidifier shows when it needs to be dried out before further use.

The RA0173 is specially designed and optimized for use with 1/8" microphones for sound pressure measurements, when high speed wind comes from one known direction e.g. in a wind tunnel.

The RA0190 is a right-angled adapter for using a 1/2" microphone with a 1/2" preamplifier. It can be used with any standard 1/2" microphone and 1/2" preamplifier. The RA0190 could be useful in situations where the microphone has to be flush mounted on a wall.

GRAS RA0302 is a removal tool for 1/2" and 1/4" flush-mount microphones.

Extension cable for the GRAS 41AM and 41CN (and the earlier GRAS 41CM) Outdoor Microphone Systems . Cable length 30 m.

Extension cable for the GRAS 41AM and 41CN (and the earlier GRAS 41CM) Outdoor Microphone Systems . Cable length 20 m.

Extension cables for the Outdoor Microphone Systems Types 41AM and 41CN (and the earlier Type 41CM). Cable length 10 m.

  Extension cables for the Outdoor Microphone Systems Types 41AM and 41CN (and the earlier Type 41CM). Cable length 3 m.  

Extension cable for the Outdoor Microphone Systems Types 41AM and 41CN (and the earlier Type 41CM). Cable length 50 m.

Extension cable for the Outdoor Microphone Systems Types 41AM and 41CN (and the earlier Type 41CM). Cable length 100 m.

Extension cable for the GRAS 41AM and 41CN Outdoor Microphone Systems (and the earlier GRAS 41CM). Cable length 200 m (656.2 feet).

Calibration Control Box for GRAS 41AM/41CN. The AC0001 is a control box with local and remote facilities for switching on/off the Actuator Calibration of the GRAS 41AM and 41CN Outdoor Microphone Systems. It also has a BNC output for analysing the signals from these Outdoor Microphone Systems. It can be connected to a 12 – 18 V DC mains/line adapter for powering the GRAS 41AM and 41CN.

The GRAS AM0009 is a set of 5 windscreens.  The windscreen is included with the complete windscreens with birdspikes i.e. AM0145, AM0370, and AM0052 but can be replaced separatelly when worn out.

For mounting GRAS 41AM/41CN Outdoor Microphones and GRAS 41AL/41AO Environmental Microphones on a pole or tripod.

For mounting GRAS 41AM/41CN Outdoor microphones and GRAS Environmental microphones 41AL/41AO (fitted with Pole Adapter AM0029) on a tripod. Has 1 1/2" RG (ISO 228/1) male thread on top and 3/8” UNC-16 female thread at the bottom.

For protecting the microphone assembly in Outdoor Microphones GRAS 41AM/41CN.

The GRAS AM0038 is a tool for dismantling the microphone assembly of Outdoor Microphones Type 41AM/41CN.

The AM0052 is a windscreen, complete with antibird spikes, for mounting on the Outdoor Microphone Systems GRAS 41AM and 41CN.

The AM0089 is a spherical windscreen for fitting directly over an existing windscreen with bird spikes, i.e. for outdoor and environmental microphones.

The AM0378 is a windscreen specially designed and optimized for use with GRAS 41AC Outdoor microphones for sound pressure measurements under free-field conditions, i.e. in situations where you want to reduce wind noise.

The RA0009 is an adapter for calibrating the Outdoor Microphone System Type 41AM. It fits over the rain protection cap of the GRAS 41AM and permits in-situ calibration using a Pistonphone such as the GRAS 42AA or a Calibrator such as the GRAS 42AB.

The RA0041 is an adapter for calibrating the GRAS 41CN Outdoor Microphone System . It fits over the rain protection cap of the 41CN and permits in-situ calibration using a Pistonphone such as the 42AA or a Calibrator such as the 42AB.

The GRAS OP0023 contains calibration adapters for 1/2”, 1/4" and 1/8” sizes of  GRAS Flush-mount Microphone Sets.

The GRAS OP0025 kit contains a calibration adapter for GRAS 1/4" precision Surface Microphones.

Coupler for 1” microphones. For use with GRAS pistonphones.

Two-port coupler for 1/2” microphones. Used in comparison calibrations between two 1/2” microphones; one of which is a reference microphone. It can also be used in measuring the P-I (Pressure-Intensity) Index of intensity probes at 250 Hz. For use with GRAS 42AA & 42AP Pistonphones.

Two-port high-pressure coupler for 1/2” microphones. Used in comparison calibrations between two 1/2” microphones; one of which is a reference microphone. It can also be used in measuring the P-I (Pressure-Intensity) Index of intensity probes at 250 Hz. For use with GRAS 42AC Pistonphone.

Pistonphone coupler which is factory mounted on GRAS Pistonphone and they are factory calibrated as one unit.

Adapter for GRAS  1/4" and 7 mm microphones when calibrating using GRAS Pistonphones and Sound Calibrator.

1/2" Adapter for 1/8" microphones when calibrating using GRAS pistonphones and Sound Calibrator.

Octopus couplers for calibrating up to eight 1/2" microphones simultaneously.

A larger-volume coupler for enabling GRAS 42AA/AP Pistonphone to produce a sound pressure level of 94 dB instead of 114 dB re. 20 μPa. Essential when calibrating highly sensitive, GRAS low noise measuring systems.

A pistonphone adapter for calibration checking the Ear Simulator Type 43AE when a pinna simulator is mounted on the IEC 60711 Ear Simulator RA0045.

Adapter for Pistonphone calibrating a GRAS RA0045 Ear Simulator with a KEMAR Ear Canal extension.

This precision barometer has an LCD which can display (toggle button) either the static-pressure correction (e.g. -0.13 dB) for a pistonphone or the ambient static pressure (e.g. 997 hPa). This product is intended as optional accessory for pistonphones which as standard has an analogue barometer included i.e. for GRAS 42AA, 42AC & 42AC-S2. When used for correction of these, the accuracy is improved.

This is a pistonphone adapter for sensitivity calibration of our precision 1/4" surface microphone sets. The adapter is designed for laboratory calibration and can also be used for in-situ verification.

This is a pistonphone adapter which is designed for field verification of the 1/2" flush-mount microphone included in GRAS 67AX/67AD Ground Array Microphone kits.

The GRAS AF0008 is an adapter for using a 1/2" microphone cartridge with a GRAS 26AB 1/4" preamplifier.

The AG0001 is an adapter for a 7-pin LEMO connector and a traditional 7-Pin B&K microphone input connector.

An adapter for using a CCP preamplifier/microphone set with a GRAS 12AA, 12AG or 12AK Power Module. One end plugs straight into the Power Module’s input LEMO connector and the other end has a BNC socket for making a connection with a CCP preamplifier/microphone set.

The GRAS AG0003 is an adapter for an XLR connector and a CCP compatible preamplifier with a BNC Connector at the end of the cable.

The GRAS AL0003 consists of 3 parts: a swivel head for mounting on tripods with a standard 1/4" UNC-20 thread and adapters for mounting a microphone set with 1/2" or 1/4" body diameter on the swivel head. Microphone sets/Preamplifiers with Microdot connector or 5-pin LEMO do not fit.

Compact, light-weight tripod.Its main features are:• Standard mounting thread (1/4” UNC-20)• Crank-adjusted centre column• Rubber feet• Adjustable tripod legs with locks• Max. height 107 cm, retracted 28.5 cm• Weight 400 g

The GRAS AL0005 swivel adapter provides stepless angular adjustment of a microphone holder with a microphone set.

A versatile and robust tripod for measurement setups and cameras.

The AL0008 is an adapter for mounting 1/2" preamplifiers with microphones on tripods with a standard 1/4" W thread.

The GRAS AL0012 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 1/2" diameter preamplifier.

The AL0028 is an adapter for mounting microphones with 7 mm body diameter on tripods with a standard 1/4" thread.

The AL0029 is an adapter for mounting microphones with 1/4" body diameter on tripods with a standard 1/4" thread.

The GRAS GR0010 is an adapter for adapting a GRAS 1/2" pressure microphone to a GRAS 1/4" preamplifier.

The RA0062 is a 20 pF input adapter for 1/2" preamplifiers. One end screws on to a 1/2" preamplifier and the other end has a BNC input connector. This enables connecting a signal generator to the input of the preamplifier. Short circuiting the BNC input results only in loading the preamplifier by 20 pF.

The RA0062-S1 is a 50 pF input adapter for 1/2" preamplifiers. One end screws on to a 1/2" preamplifier and the other end has a BNC input connector. This enables connecting a signal generator to the input of the preamplifier. Short circuiting the BNC input results only in loading the preamplifier by 50 pF.

The RA0080 is a 6pF input adapter for 1/4" preamplifiers. One end screws on to a 1/4" preamplifier and the other end has a Microdot input connector. This enables connecting a signal generator to the input of the preamplifier. Short circuiting the Microdot input results only in loading the preamplifier by 6 pF.

The GRAS RA0093 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 1/2" diameter preamplifier. The microphone can be set in angles between 0 and 180 degrees in 45 degree steps.

The GRAS RA0093-S1 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching at a 1/2" diameter preamplifier. The microphone can be set freely (stepless) in angles between 0 and 180 degrees.

Adjustable, high quality, stainless steel holder for mounting an Array module PR0001 or PR0002 on a tripod.Angular adjustment: 180° in steps of 45°

The GRAS RA0096 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 1/4" diameter preamplifier. The microphone can be set in angles between 0 and 180 degrees in 45 degree steps.

The GRAS RA0096-S1 is an adapter for mounting a microphone set (microphone/preamplifier) on tripods having a standard 1/4” UNC-20 male thread. The adapter is provided with a clamp for attaching a 7mm diameter preamplifier. The microphone can be set in angles between 0 and 180 degrees in 45 degree steps.

The RA0125 is to be mounted instead of a microphone on a standard 1/2" preamplifier such as the Type 26AK. Thereby you get a Microdot (UNF 10-32) input to the preamplifier. Useful when a high input impedance is required for transducers such as hydrophones and accelerometers.

The GRAS RA0185 is a holder for mounting an Array microphone (7 mm diam.) on a GRAS PR0002 Array module.

The GRAS RA0245 is a holder for mounting a standard 1/4" microphone set with Microdot connector on a GRAS PR0002 Array module.

For adapting the 3/8" W thread of a "non GRAS" tripod to 1/4" W thread.

230 V AC to 15 V DC 7.5 W. Mains connector for EU.

110 V AC to 15 V DC 7.5 W. Mains connector for USA.

100 - 240 V AC to 6 V DC 10 W.

230 V AC to 15 V DC 7.5 W. Mains connector for UK.

6-pin LEMO FFA.2S.306 male plug as supplied with GRAS 41AM/CN

7-pin LEMO FGG.1B.307 male plug for preamplifier extension cables.

7-pin LEMO 1B series female connector for panel mounting.

7-pin LEMO 1B series female connector for cable mounting.

A shelf for mounting instrument, e.g. GRAS Power Modules, and can itself be mounted in a standard 19” instrument rack via its flanges.

Bracket for mounting two GRAS Power Modules (GRAS 12AA/12AK) side-by-side.

Provides a convenient platform for calibrating IEC 60318-1 Ear Simulator e.g. GRAS RA0039.

For Array module Type PR0001/PR0001-1 and PR0002.

Used to extend Array Module Type PR0001/ PR0001-1 in the horizontal direction.

The 50 mm spacer is used to extend a microphone array with Array Module Type PR0001/ PR0001-1 in the vertical direction.

The PA0018 is a cable drum for approximately 200 m microphone cable.

A mounting rail with central cable connection for up to six GRAS array microphones, e.g. GRAS 40PH or 40PL.

A mounting rail which allows array microphones to be spaced at intervals of 25 mm, 50 mm, 75 mm, 100 mm, etc.

Straight adapter, length 7.5 mm, for placing between a 1/4" microphone and a 1/4" preamplifier. This item is an extender (not adapting anything).

For utilising the signal and signal-ground pins only of the 7-pin LEMO input of a preamplifier power supply.  

Used when dismantling the microphone assembly of Outdoor Microphone Systems.

A set of 6 spacers (50 mm) GR0707 for Array Modules PR0001 and PR0001-1.

The GRAS RA0399

For adapting a female 3/8” UNC-16 thread to a female 1/4” UNC-20 thread.

Small Right Ear 55 Shore-OO.

Small Left Ear 55 Shore-OO.

Large Right Ear 55 Shore-OO.

Large Left Ear 55 Shore-OO.

Small Right Ear 55 Shore OO for sound quality.

Small Left Ear 55 Shore OO for sound quality.

Large Right Ear 55 Shore-OO.

Large Left Ear 55 Shore-OO.

Small Right Ear 55 Shore-OO.

Small Left Ear 55 Shore-OO.

ANSI Pinna Left 55 Shore-OO.

ANSI Pinna Right 55 Shore-OO.

Large Right Ear (VA-style) 55 Shore-OO.

Large Left Ear (VA-style) 55 Shore-OO.

Ear-mould simulator for connecting a GR0917 (coupler holder) to a BTE hearing aid via 2 mm (for KB0110) or 3 mm (for KB0111) plastic tubing.

Ear-mould simulator for connecting a GR0917 (coupler holder) to a BTE hearing aid via 3 mm plastic tubing.

Small Right Ear 35 Shore-OO.

Small Left Ear 35 Shore-OO.

Large Right Ear 35 Shore-OO.

Large Left Ear 35 Shore-OO.

Small Right Ear 35 Shore OO for sound quality.

Small Left Ear 35 Shore OO for sound quality.

Large Right Ear 35 Shore-OO.

Large Left Ear 35 Shore-OO.

Large Right Ear (VA-style) 35 Shore-OO.

Large Left Ear (VA-style) 35 Shore-OO.

KB5000 is a right anthropometric pinna for KEMAR for accurate and repeatable testing of headphones and earphones. It has anatomically correct ear-entrance and ear-canal with correct soft ear helix and provides perfect sealing and insertion accuracy for headphones and earphones. The hardness is 35 Shore OO

KB5001 is a left anthropometric pinna for KEMAR for accurate and repeatable testing of headphones and earphones. It has anatomically correct ear-entrance and ear-canal with correct soft ear helix and provides perfect sealing and insertion accuracy forheadphones and earphones. The hardness is 35 Shore OO

KB5002 is an anthropometric pinna for KEMAR. It is a large right pinna, a mirrored copy of the KB5001. It is  for accurate and repeatable testing of headphones and earphones. It has anatomically correct ear-entrance and ear-canal with correct soft ear helix and provides perfect sealing and insertion accuracy for headphones and earphones. The hardness is 35 Shore OO

KB5010 is a right anthropometric pinna for 45CA for accurate and repeatable testing of headphones and earphones. It has anatomically correct ear-entrance and ear-canal with correct soft ear helix and provides perfect sealing and insertion accuracy for headphones and earphones. The hardness is 35 Shore OO

KB5011 is a left anthropometric pinna for 45CA for accurate and repeatable testing of headphones and earphones. It has anatomically correct ear-entrance and ear-canal with correct soft ear helix and provides perfect sealing and insertion accuracy for headphones and earphones. The hardness is 35 Shore OO

For use with GRAS couplers and artificial ears. It has an adjustable spring-loaded arm to exert a variable force on the test object.

Dimension adapter which increases the diameter of a 1/2" microphone to 1". The adapter is relevant for use with GRAS 45CA Hearing-protector test fixture or in other situations where a 1/2" microphone is to be mounted in a 1" inner diameter hole/cylinder.

Test base for GRAS artificial ears and couplers.

Use as a substitute, if necessary, for GRAS RA0523 Snap coupling in the GRAS 43AD Artificial Ear to avoid ground loops. In this case, also replace the 1/2" microphone protection grid with the GRAS RA0091 Inslulated microphone protection grid. 

Moulding cup used to fit in-ear hearing aids to IEC 60318-4 (60711) RA0045 Ear Simulator.

For use with 2cc Coupler RA0113.

For use with 2cc Coupler RA0113.

This retro-fit kit enables mounting of the IEC 60318-4 (60711) Ear Simulator on KEMAR models earlier than 2005.

Used for GRAS 45CA when configured with IEC 60318-4 Ear Simulator and KEMAR pinna.

Adapts 1/2" preamplifier to the IEC 60318 Coupler. Designed for use with RA0039 and GRAS 45CA.

This kit is intended for use with previous versions of GRAS RA0052 Artificial Ear Test Jig (before summer 2014). With this kit it is possible to double the force of the arm.

Kit with plastic ear holder plates and plastic ear canal extensions. For test of binaural hearing aids which are based on radio frequencies.

GRAS RA0311 is a retrofit kit for fitting anthropometric pinna on a KEMAR previously fitted with standard pinna.

The GRAS RA0501 is a non-conductive mounting adapter for 1/2" flush-mount microphone sets.

The GRAS RA0502 is a non-conductive mounting adapter for 1/4" flush-mount microphone sets.

The GRAS RA0503 is a non-conductive mounting adapter for 1/8" flush-mount microphone sets.

RA4800 is a field verification adapter for UTP, surface-mount, and flush-mount microphones. With this adapter, it is possible to perform quick and reliable verification without having to dismount the microphone.