Accessories

GRAS Sound & Vibration offers a wide range of standard accessories in the form of cables, adapters, windscreens and tripods for use in measuring set-ups. These can be broadly split up under accessories for microphones, for preamplifiers, for outdoor microphones, for pistonphones and pinna simulators and accessories for ear simulators. Some are included with certain products, some are available as extras. All can be ordered individually. The brief descriptions given here as well as those on downloadable accessories sheet will help you to select what you need for your particular set-up. At all events, feel free to contact your GRAS partner if you need advice or further information.

GRAS Sound & Vibration also offers a wide range of special products and customised solutions. Our experience within the field of acoustics and vibration, combined with our short development time, enable us to provide innovative solutions to complex measurement problems in close co-operation with the customer. For a technical discussion of your measurement requirements, please contact your local representative or contact GRAS Sound & Vibration directly in Denmark.

GRAS RA0245 Holder for 1/4" microphone set in PR0002 Array module

Material: Black POM

GRAS RA0245 Holder for 1/4" microphone set in PR0002 Array module

The GRAS RA0245 is a holder for mounting a standard 1/4" microphone set with Microdot connector on a GRAS PR0002 Array module...

GRAS RA0251 KEMAR Retrofit kit for test of Binaural Hearing Aid

GRAS RA0251 KEMAR Retrofit kit for test of Binaural Hearing Aid

Kit with plastic ear holder plates and plastic ear canal extensions. For test of binaural hearing aids which are based on radio frequencies...

GRAS RA0302 Removal Tool for 1/2" and 1/4" Flush-mount Microphones

Material: Stainless steel

GRAS RA0302 Removal Tool for 1/2" and 1/4" Flush-mount Microphones

GRAS RA0302 is a removal tool for 1/2" and 1/4" flush-mount microphones...

GRAS RA0311 KEMAR Retrofit Kit for Anthropometric Pinna

GRAS RA0311 KEMAR Retrofit Kit for Anthropometric Pinna

GRAS RA0311 is a retrofit kit for fitting anthropometric pinna on a KEMAR previously fitted with standard pinna...

GRAS RA0399 H-shaped holder for 6-unit microphone array

Freq range: x Hz to y kHz

GRAS RA0399 H-shaped holder for 6-unit microphone array

The GRAS RA0399..

GRAS RA0501 Mounting Adapter for 1/2” Flush-mount Microphone Set

Material: PPE GF30. (polyphenylenether modified + 30% fibre glass)

GRAS RA0501 Mounting Adapter for 1/2” Flush-mount Microphone Set

The GRAS RA0501 is a non-conductive mounting adapter for 1/2" flush-mount microphone sets...

GRAS RA0502 Mounting Adapter for 1/4” Flush-mount Microphone Set

Material: PPE GF30. (polyphenylenether modified + 30% fibre glass)

GRAS RA0502 Mounting Adapter for 1/4” Flush-mount Microphone Set

The GRAS RA0502 is a non-conductive mounting adapter for 1/4" flush-mount microphone sets...

GRAS RA0503 Mounting Adapter for 1/8” Flush-mount Microphone Set

Material: PPE GF30. (polyphenylenether modified + 30% fibre glass)

GRAS RA0503 Mounting Adapter for 1/8” Flush-mount Microphone Set

The GRAS RA0503 is a non-conductive mounting adapter for 1/8" flush-mount microphone sets...

GRAS RA4800 Adapter for Sensitivity Verification of Flush/Surface Microphones

For in-situ verification of surface-mount and flush-mount microphones

GRAS RA4800 Adapter for Sensitivity Verification of Flush/Surface Microphones

RA4800 is a field verification adapter for UTP, surface-mount, and flush-mount microphones.With this adapter, it is possible to perform quick and reliable verification without having to dismount the microphone...

GRAS SK0017 Tripod thread insert

Material: Stainless steel

GRAS SK0017 Tripod thread insert

For adapting a female 3/8” UNC-16 thread to a female 1/4” UNC-20 thread...

GRAS SK0057 Tripod conversion screw

Material: Metal

GRAS SK0057 Tripod conversion screw

For adapting the 3/8" W thread of a "non GRAS" tripod to 1/4" W thread...