67HB 2 m LEMO Low-noise Hemisphere kit

Freq range: 10 Hz to 16 kHz
Dyn range: 6.5 dB(A) to 110 dB
Sensitivity: 850 mV/Pa
Measures incl. feet: Diagonal 4716 mm Height 2283 mm

67HB 2 m LEMO Low-noise Hemisphere kit



The structure is made portable to achieve a high degree of freedom of location. This, combined with the easy, tool-less assembly in minutes, enables you to save expensive anechoic chamber time and to offer on-site sound power diagnostics.

The microphone positions are clearly marked to ease the mounting and maintain measurement repeatability.

The GRAS 67HB-07 2 m LEMO Low-noise Hemisphere kit, 4 channels (4 key + 4 secondary) is ISO 3746:2011 B1/ANSI S12.56 compliant and includes:

  • 1x Hemisphere structure

  • 4x GRAS 40HL 1/2” LEMO Low-noise Microphone Sets, cables, holders

The GRAS 67HB-08 2 m LEMO Low-noise Hemisphere kit, 10 channels (10 key + 10 secondary) is ISO 3744:2010 B2/ANSI S12.54 compliant and includes:

  • 1x Hemisphere structure

  • 10x GRAS 40HL 1/2” LEMO Low-noise Microphone Sets, cables, holders

The GRAS 67HB-09 2 m LEMO Low-noise Hemisphere kit, 20 channels (20 key) is ISO 3745:2012 E2/ANSI S12.55 compliant and includes:

  • 1x Hemisphere structure

  • 20x GRAS 40HL 1/2” LEMO Low-noise Microphone Sets, cables, holders

Typical applications and use

Depending on the size and the emitted acoustic level of the DUT, the hemispheres will allow sound power measurements on everything from small-sized personal electrics to office machines and IT products, household appliances, power tools, and smaller engines. The only restriction is, that the characteristic dimension of the DUT may be no more than half the measurement radius.


The hemispheres are available as preconfigured kits with 4, 10 or 20 microphone sets in 3 variations; CCP, LEMO and low-noise LEMO. In the table to the right, you will be able to find the hemisphere kit that suits your type of input module along with dynamic specifications for your application. The pre-configured hemispheres are delivered with microphone set holders that will fit all 3 microphone types. Respective cables and cable clips are included and everything is delivered in high-quality flight cases.

The recommended microphone sets can be connected directly to all professional measurement systems and are available for both CCP and 7-pin LEMO inputs. If your system platform supports intelligent transducers according to IEEE 1451.4 (TEDS), the system can be set up to identify the microphone properties and position in the array.


All included microphone sets are delivered with individual calibration charts including sensitivity values and frequency responses. These sensitivity values can be used directly in your system setup.

For frequent measurement chain verification, a reference sound source will be required. GRAS supplies 114 dB types for the standard microphone sets and a special 94 dB adapter for the low-noise sets. Depending on the use and your internal quality control requirements we recommend that the sets are re-calibrated at least every second year.

Performance and warranty

GRAS microphone sets are made of components from our proven standard portfolio and are all manufactured of high-quality material and branded parts that were chosen and processed to ensure life-long stability and robustness.

All parts are manufactured and assembled at the factory in Denmark by skilled and dedicated operators in a verified clean-room environment. The microphone diaphragm, body, and unique protection grid are made of high-grade stainless steel and make the microphone set resistant to physical damage as well as corrosion caused by aggressive air or gasses.

This, together with the reinforced gold-plated microphone terminal which guarantees a highly reliable connection, enables us to offer 5 years warranty against defective materials and workmanship. The warranty for cables is 6 months.


Frequency range (±2 dB)
10 to 16 k
Dynamic range lower limit with GRAS preamplifier
Dynamic range upper limit with GRAS preamplifier @ +28 V / ±14 V power supply
Set sensitivity @ 250 Hz (±2 dB)
IEC 61094-4 Compliance
ANSI standard
ISO 3746:2012
g / oz
15,000 / 529.1

Ordering info

 Available configurations

GRAS 67HB-07 2 m LEMO Low-noise Hemisphere kit 4 ch.
GRAS 67HB-08 2 m LEMO Low-noise Hemisphere kit 10 ch.
GRAS 67HB-09 2 m LEMO Low-noise Hemisphere kit 20 ch.


- 2 m structure
- Microphone holders (1 per ch.)
GRAS 40HL 1/2" LEMO Low-noise Microphone Set (1 per ch.)
GRAS AA0009 10 m LEMO cable


GRAS RA0277 Flight cases (2):
One with foam tailored for the microphones and cables
One with foam tailored for the structure and microphone holders

 Intelligent Pistonphone (114 dB)

 GRAS RA0090

 Pistonphone coupler (94 dB)

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Get Quote

I have read and accept the Privacy Policy.