Microphone sets with constant current power (CCP)
The constant current power (CCP) microphone sets use high-quality coaxial cables. Some sets have a 3 m cable included and others have cables as accessories. It should be noted that longer cables will influence the upper frequency and dynamic ranges.
All GRAS microphone sets are delivered as a unit and are calibrated accordingly. The sets are delivered with calibration charts including sensitivity values and frequency response curves for the complete set. The sensitivity value can therefore be used directly in your system setup. Besides the CCP variant, GRAS microphone sets are available with 7-pin LEMO input.
For frequent verification of the measurement chain, a sound source will be required. GRAS supplies a series of pistonphones and sound calibrators for this purpose. Depending on the use (field or laboratory) and your internal quality control requirements, we recommend that the sets are recalibrated at least every second year. Contact your GRAS partner for factory and accredited calibration options.
Freq range: 5 Hz to 70 kHz
Dyn range: 44 dB(A) to 166 dB
Sensitivity: 1.45 mV/Pa
GRAS 46BD 1/4" CCP Pressure Standard Microphone Set
The 46BD is a 1/4" CCP microphone set for pressure measurements...
Freq range: 5 Hz to 70 kHz
Dyn range: 44 dB(A) to 166 dB
Sensitivity: 1.45 mV/Pa
GRAS 46BD-FV 1/4" CCP Pressure Standard Microphone Set, Front Vented
The 46BD-FV is a front vented 1/4” CCP microphone set for pressure measurements...
Freq range: 5 Hz to 70 kHz
Dyn range: 44 dB(A) to 166 dB
Sensitivity: 1.45 mV/Pa
GRAS 46BD-S1 1/4" CCP Pressure Standard Microphone Set with SMB connector
The 46BD-S1 is a 1/4" CCP microphone set for pressure measurements. It is terminated with a SMB connector...
Freq range: 4 Hz to 80 kHz
Dyn range: 35 dB(A) to 160 dB
Sensitivity: 3.6 mV/Pa
Use: For general acoustic diagnostics
GRAS 46BE 1/4" CCP Free-field Standard Microphone Set
The GRAS 46BE is a ¼″ Constant Current Power CCP free-field microphone set for measuring high sound pressure levels at high frequencies. It is terminated with a 10/32 UNC microdot female connector and is TEDS compatible. The equivalent traditional 200 V LEMO type is GRAS 46BF NOTE: Optimized f..
Freq range: 3.15 Hz to 70 kHz
Dyn range: 60 dB(A) to 184 dB
Sensitivity: 0.25 mV/Pa
GRAS 46BG 1/4" CCP Pressure Standard Microphone Set, High Pressure
The GRAS 46BG is a 1/4" CCP pressure microphone set for measuring very high sound pressure levels...
Freq range: 3.15 Hz to 70 kHz
Dyn range: 60 dB(A) to 184 dB
Sensitivity: 0.25 mV/Pa
GRAS 46BG-FV 1/4" CCP Pressure Front Vented Microphone Set, High Pressure
The GRAS 46BG-FV is a front-vented 1/4" CCP pressure microphone set for measuring very high sound pressure levels...
Freq range: 4 Hz to 20 kHz
Dyn range: 24 dB(A) to 146 dB
Sensitivity: 20 mV/Pa
GRAS 46BL-1 1/4" CCP Pressure Standard Microphone Set, High Sensitivity
GRAS 46BL-1 is a high-sensitivity, low-noise ¼″ CCP condenser microphone set with rear-venting...
Freq range: 4 Hz to 20 kHz
Dyn range: 24 dB(A) to 146 dB
Sensitivity: 20 mV/Pa
GRAS 46BL-1-FV 1/4" CCP Pressure Standard Microphone Set, High Sensitivity, Front-vented
GRAS 46BL-1-FV is a high-sensitivity, low-noise ¼″ CCP condenser microphone set with front-venting...
Freq range: 6.5 Hz to 140 kHz
Dyn range: 52 dB(A) to 174 dB
Sensitivity: 0.8 mV/Pa
GRAS 46DD 1/8'' CCP Pressure Standard Microphone Set
GRAS 46DD 1/8'' CCP Pressure Microphone Set..
Freq range: 6.5 Hz to 70 kHz
Dyn range: 52 dB(A) to 175 dB
Sensitivity: 0.8 mV/Pa
GRAS 46DD-FV 1/8'' CCP Pressure Standard Microphone Set, Front Vented
GRAS 46DD-FV is a 1/8'' CCP Pressure Microphone Set with front venting..
Freq range: 6.5 Hz to 140 kHz
Dyn range: 52 dB(A) to 174 dB
Sensitivity: 0.8 mV/Pa
GRAS 46DE 1/8'' CCP Pressure Standard Microphone Set
The GRAS 46DE is a 1/8'' CCP Pressure Microphone Set. The preamplifier is 1/8", making it the world's smallest microphone set...